INTRODUCING

the most versatile cargo system for pickup trucks.

the most innovative & versatile cargo system for pickup trucks.

Introducing

Limited first run begins May, 2026

INTRODUCING

3-IN-1  Modular Cargo System

Slide, Organize, and Expand with the most versatile cargo system for everyday truck owners.

The SLEDD System

THE

System

3-in-1 Modular Cargo System

ULTRA-LOW

CARGO SLIDE

Only 1.75"H + 80% Extension


The Sledd can comfortably handle 600 lbs. of cargo, which is more than enough for most of us. It will make light work of all your hunting and fishing gear, sports equipment, tailgating, and camping setups. It makes packing for vacation a breeze, home improvement store hauls easier, and those shopping trips with the wife even more bearable fun.

  • SPECS

    Construction:

    • Frame | 3/16" A36 Carbon Steel 
    • Deck | 10 & 15 Series 6063 T6 Aluminum Extrusions, 1/8" 6061 T6 Aluminum Angles, Lightweight 3/4" Birch Plywood
    • Rubber Mat | 1/8" pebble textured natural rubber
    • Handles & Grips | 3D Printed with ASA Filament

    Dimensions:

    • Midsize / 5 ft. bed | 59.5" L x 42.5"W x 3.125"H (Includes side rails).

    Weight:

    • Frame weight: 37 lbs.
    • Deck Weight: 70 lbs.
    • Full Size Divider Weight: 12 lbs.
    • Total System wt. (frame, deck, 1 divider): 116 lbs.

    Payload capacity: 600 lbs, unsupported*


    • *The Sledd uses a combination of its own bearing setup as well as the truck's own tailgate to support the (extended) load, so we only list the unsupported weight. When used with your tailgate, it will support more. The average weight capacity of a modern truck tailgate is roughly 500 lbs.

    Bearings:

    • Front | 5202 Angular Contact Bearings rated @ 1,350 lbs. static load (ea.).
    • Rear | Each rear wheel carriages feature (2)-6201 bearings, each rated @ 685 lbs. + a 626 nylon-coasted side roller guide bearing.

    Brake System:

    • Dual-Pin Cable Pull Brake System with 4 stop points.

The items in this picture total 350 pounds.

THE

System

3-in-1 Modular Cargo System

Cargo Slide

Organization

Bed Extender

+ Endless mounting solutions

ULTRA-LOW

CARGO SLIDE

Industry-BEST 1.5" H

750 lb Capacity

80% Extension

REMOVABLE DECK

The Sledd is roughly half the height of the closest competitor. It's also light enough for one person to remove while still maintaining a respectable payload capacity that can handle the vast majority of use cases for truck owners.  It makes light work of hunting and fishing gear, sports equipment, tailgating, and camping setups. It makes packing & traveling a breeze, home improvement store hauls easier, and grocery trips a pleasure.

  • SPECS

    Construction:

    • Frame | 3/16" A36 Carbon Steel 
    • Deck | 10 & 15 Series 6063 T6 Aluminum Extrusions, 1/8" 6061 T6 Aluminum Angles, Lightweight 3/4" Birch Plywood
    • Rubber Mat | 1/8" pebble textured natural rubber
    • Handles & Grips | 3D Printed with ASA Filament

    Dimensions:

    • Midsize / 5 ft. bed | 59.5" L x 42.5"W x 3.125"H (Includes side rails).

    Weight:

    • Frame weight: 37 lbs.
    • Deck Weight: 70 lbs.
    • Full Size Divider Weight: 12 lbs.
    • Total System wt. (frame, deck, 1 divider): 116 lbs.

    Payload capacity: 750 lbs, unsupported*


    • *The Sledd uses a combination of its own bearing setup as well as the truck's own tailgate to support the (extended) load, so we only list the unsupported weight. When used with your tailgate, it will support more. The average weight capacity of a modern truck tailgate is roughly 500 lbs.

    Bearings:

    • Front | 5202 Angular Contact Bearings rated @ 1,350 lbs. static load (ea.).
    • Rear | Each rear wheel carriages feature (2)-6201 bearings, each rated @ 685 lbs. + a 626 nylon-coasted side roller guide bearing.

    Brake System:

    • Dual-Pin Cable Pull Brake System with 3 stop points.

Cargo pictured weighs 705 lbs.

Removable by design.


Let's be honest, for some tasks - like hauling oversized appliances or loose items like sand & gravel - a cargo slide doesn't make the most sense. This is where the removable deck of the Sledd comes in handy!


Simply lift the front of the deck, turn the Fliplocks over, and remove the deck entirely.


The frame rails stay in the bed, but there's no cross bar to get in the way.


Better yet - it stores upright using the divider as a kickstand to save space in your garage.

ENDLESS MOUNTING OPTIONS.


The Sledd conveniently uses T-Slot aluminum extrusions on the main rails and dividers for both horizontal and vertical mounting options.


We'll be steadily releasing custom created mounts in the future. We'd also like to hear requests from you.  Drop us a line at justin@thesledd.com.

ORGANIZATION
+ LAYERED STORAGE


The Sledd can comfortably handle 750 lbs. of cargo, which is more than enough for most of us. It will make light work of all your hunting and fishing gear, sports equipment, tailgating, and camping setups. It makes packing & traveling a breeze, and home improvement store hauls much easier.

Cargo pictured weighs 353 lbs.

Pictured with 2 XTND dividers.

Industry First

Cargo Slide + Bed Extender

Just flip the divider around, lock it down, and pull the slide out to the first stop position and now you have an extended payload capability.

Built for everyday truck people

You’ve been there. Digging through gear. Climbing into the bed. Trying to keep things from sliding everywhere. Most solutions are built for contractors — heavy, bulky, and overkill for most people. SLEDD is different. It’s a smarter, lower-profile system that gives you access, organization, and flexibility — without sacrificing your entire bed.


Let's be honest, the majority of us aren't using our trucks to haul heavy tools, machinery, and supplies on a daily basis. We're weekend warriors, DIY'ers, sports & outdoors people, and travelers.


User comments all around the internet told us many others face the same conundrum of finding a system that matches the way they use their trucks. For those of us with short beds & tonneau covers, we'd lose too much bed height with most cargo slides. Or with a storage box & drawer system, we lose the ability to use our entire bed for hauling other gear on occasion. Either a system was too heavy to carry around on a daily basis, or it was too restrictive.


After a 3-year journey of research & development and creating countless prototypes, we arrived at the intersection of features + flexibility.

Finally, a system that doesn't take up a ton of bed height, weighs less than 100 lbs., and is easily is removable. The Sledd is highly flexible with endless mounting possibilities and organization options. Even better, the XTND divider doubles as a bed extender - an industry first.


INITIAL LAUNCH

Preorders

Units will begin launching May 2026.

INITIAL LAUNCH DETAILS

  • Greater Savannah & outlying areas, and will include delivery + installation.
  • Limited run of 10 units
  • Introductory pricing of $1495 for the full system
  • $500 deposit required
  • 90-Day Money Back Guarantee